Imágenes de páginas
PDF
EPUB

PARAGRAPH 315.

ACT OF 1922.

PAR. 315. Wire rods: Rivet, screw, fence, and other iron or steel wire rods, whether round, oval, or square, or in any other shape, nail rods and flat rods up to six inches in width ready to be drawn or rolled into wire or strips, all the foregoing in coils or otherwise, valued at not over 4 cents per pound, threetenths of 1 cent per pound; valued at over 4 cents per pound, six-tenths of 1 cent per pound: Provided, That all round iron or steel rods smaller than twenty one-hundredths of one inch in diameter shall be classified and dutiable as wire: Provided further, That all iron or steel wire rods which have been tempered or treated in any manner or partly manufactured shall pay an additional duty of one-fourth of 1 cent per pound: Provided further, That on all iron or steel bars and rods of whatever shape or section which are cold rolled, cold drawn, cold hammered, or polished in any way in addition to the ordinary process of hot rolling or hammering, there shall be paid one-eighth of 1 cent per pound in addition to the rates provided on bars or rods of whatever section or shape which are hot rolled; and on all strips, plates, or sheets of iron or steel of whatever shape, other than polished, planished, or glanced sheet iron or sheet steel, which are cold hammered, blued, brightened, tempered, or polished by any process to such perfected surface finish or polish better than the grade of cold rolled, smoothed only, there shall be paid two-tenths of 1 cent per pound in addition to the rates provided on plates, strips, or sheets of iron or steel of common or black finish of corresponding thickness or value.

ACT OF 1909.

PAR. 134. Wire rods: Rivet, screw, fence, and other iron or steel wire rods, whether round, oval, flat, or square, or in any other shape, and nail rods, all the foregoing in coils or otherwise, valued at four cents or less per pound, three-tenths of one cent per pound; valued over four cents per pound, six-tenths of one cent per pound: Provided, That all round iron or steel rods smaller than number six wire gauge shall be classed and dutiable as wire: Provided further, That all iron or steel wire rods which have been tempered or treated in any manner or partly manufactured shall pay an additional duty of one-half of one cent per pound.

PAR. 137. On all iron or steel bars or rods of whatever shape or section which are cold rolled, cold drawn, cold hammered, or polished in any way in addition to the ordinary process of hot rolling or hammering, there shall be paid one-eighth of one cent per pound in addition to the rates provided in this section on bars or rods of whatever section or shape which are hot rolled; and on all strips, plates, or sheets of iron or steel of whatever shape, other than the polished, planished, or glanced sheet iron or sheet steel hereinbefore provided for, which are cold hammered, blued, brightened, tempered, or polished by any process to such perfected surface finish or polish better than the grade of cold rolled, smoothed only, hereInbefore provided for, there shall be paid four-tenths of one cent per pound in addition to the rates provided in this section upon plates, strips, or sheets of iron or steel of common or black finish of corresponding gauge or value;

*

*

*.

[No corresponding provision for horseshoe nail rods.]

ACT OF 1913.

PAR. 113. Rivet, screw, fence, nail, and other iron or steel wire rods, whether round, oval, or square, or in any other shape, and flat rods up to six inches in width ready to be drawn or rolled into wire or strips, all the foregoing in coils or otherwise, including wire rods and iron or steel bars, cold rolled, cold drawn, cold hammered, or polished in any way in addition to the ordinary process of hot rolling or hammering, not specially provided for in this section, 10 per centum ad valorem: Provided, That all round iron or steel rods smaller than twenty onehundredths of one inch in diameter shall be classed and dutiable as wire. PAR. 109. * sheets or plates composed of iron, steel, * and such as are cold hammered, blued, brightened, tempered, or polished by any process to such perfected surface finish or polish better than the grade of cold rolled, smoothed only; * 15 per centum ad valorem. PAR. 110. * * rolled wire rods in coils or bars not smaller than twenty onehundredths of 1 inch in diameter when made by the crucible, electric, or cementation process, * * and finished by rolling, hammering, or otherwise, 15 per centum ad valorem.

*

*

*

PAR. 554. *
* * * [Free].

*

*

*

*

*

*

*

*

* *

*

*

* horseshoe nail rods,

PARAGRAPH 316.

ACT OF 1922.

PAR. 316. Round iron or steel wire, not smaller than ninety-five one-thousandths of one inch in diameter, three-fourths of 1 cent per pound; smaller than ninety-five one-thousandths and not smaller than sixty-five one-thousandths of one inch in diameter, 14 cents per pound; smaller than sixty-five one-thousandths of one inch in diameter, 14 cents per pound: Provided, That all of the foregoing valued above 6 cents per pound shall pay a duty of 25 per centum ad valorem; all wire composed of iron, steel, or other metal, not specially provided for (except gold, silver, or platinum); all flat wires and all steel in strips not thicker than one-quarter of one inch and not exceeding sixteen inches in width, whether in long or short lengths, in coils or otherwise, and whether rolled or drawn through dies or rolls, or otherwise produced, 25 per centum ad valorem: Provided, That all wire of iron, steel, or other metal coated by dipping galvanizing, sherardizing, electrolytic, or any other process with zinc, tin, or other metal, shall pay a duty of two-tenths of 1 cent per pound in addition to the rate imposed on the wire of which it is made; telegraph, telephone, and other wires and cables composed of iron, steel, or other metal (except gold, silver, or platinum), covered with or composed in part of cotton, jute, silk, enamel, lacquer, rubber, paper, compound, or other material, with or without metal covering, 35 per centum ad valorem; wire rope and wire strand, 35 per centum ad valorem; spinning and twisting ring travelers, 35 per centum ad valorem; wire heddles and healds, 25 cents per thousand and 30 per centum ad valorem.

ACT OF 1909.

*

PAR. 135. Round iron or steel wire, not smaller than number thirteen wire gauge, one cent per pound; smaller than number thirteen and not smaller than number sixteen wire gauge, one and one-fourth cents per pound; smaller than number sixteen wire gauge, one and three-fourths cents per pound: Provided, That all the foregoing shall pay duty at not less than thirtyfive per centum ad valorem; all wire composed of iron, steel, or other metal except gold or silver, covered with cotton, silk, or other material, * * and all flat wires, and steel in strips, not thicker than number fifteen wire gauge and not exceeding five inches in width, whether in long or short lengths, in coils or otherwise, and whether rolled or drawn through dies or rolls, or otherwise produced, and all other wire not specially provided for in this section, shall pay a duty of not less than thirty-five per centum ad valorem; on iron or steel wire coated by dipping, galvanizing, or similar process with zinc, tin, or other metal, there shall be paid two-tenths of one cent per pound in addition to the rate imposed on the wire of which it is made: Provided further, That articles manufactured wholly or in chief value of any wire or wires provided for in this paragraph shall pay the maximum rate of duty imposed in this section upon any wire used in the manufacture of such articles and in addition thereto one cent per pound: And provided further, That no article made from or composed of wire shall pay a less rate of duty

ACT OF 1913.

*

PAR. 114. Round iron or steel wire; wire composed of iron, steel, or other metal, except gold or silver, covered with cotton, silk, or other material; * * and all flat wires and steel in strips not thicker than number fifteen wire gauge and not exceeding five inches in width, whether in long or short lengths, in coils or otherwise, and whether rolled or drawn through dies or rolls, or otherwise produced; telegraph, telephone, and other wires and cables composed of metal and rubber, or of metal, rubber, and other materials; iron and steel wire coated by dipping, galvanizing, or similar process with zinc, tin, or other metal; all other wire not specially provided for in this section and articles manufactured wholly or in chief value of any wire or wires provided for in this section; all the foregoing 15 per centum ad valorem; wire heddles and healds, 25 per centum ad valorem; wire rope, 30 per centum ad valorem.

[blocks in formation]

PAR. 317. All galvanized wire not specially provided for, not larger than twenty one-hundredths and not smaller than eight one-hundredths of one inch in diameter, of the kind commonly used for fencing purposes, galvanized wire fencing composed of wires not larger than twenty one-hundredths and not smaller than eight one-hundredths of one inch in diameter; and all wire commonly used for baling hay or other commodities one-half of 1 cent per pound.

ACT OF 1909.

PAR. 135. * * * all other wire not specially provided for in this section, shall pay a duty of not less than thirty-five per centum ad valorem; on iron or steel wire coated by dipping, galvanizing or similar process with zinc, tin, or other metal, there shall be paid two-tenths of one cent per pound in addition to the rate imposed on the wire of which it is made: Provided further, That articles manufactured wholly or in chief value of any wire or wires provided for in this paragraph shall pay the maximum rate of duty imposed in this section upon any wire used in the manufacture of such articles and in addition thereto one cent per pound: And provided further, That no article made from or composed of wire shall pay a less rate of duty than forty per centum ad valorem ;

* * *

[blocks in formation]

PARAGRAPH 318.

ACT OF 1922.

PAR. 318. Woven-wire cloth: Gauze, fabric, or screen, made of wire composed of steel, brass, copper, bronze, or any other metal or alloy, not specially provided for, with meshes not finer than thirty wires to the lineal inch in warp or filling, 25 per centum ad valorem; with meshes finer than thirty and not finer than ninety wires to the lineal inch in warp or filling, 35 per centum ad valorem; with meshes finer than ninety wires to the lineal inch in warp or filling, 45 per centum ad valorem.

[blocks in formation]
[blocks in formation]

PAR. 319. Iron or steel anchors and parts thereof; forgings of iron or steel, or of combined iron and steel, not machined, tooled, or otherwise advanced in condition by any process or operation subsequent to the forging process, not specially provided for, 25 per centum ad valorem.

[blocks in formation]

PAR. 320. Electric storage batteries and parts thereof, storage battery plates, and storage battery plate material, wholly or partly manufactured, all the foregoing not specially provided for, 40 per centum ad valorem.

[blocks in formation]

PAR. 321. Antifriction balls and rollers, metal balls and rollers commonly used in ball or roller bearings, metal ball or roller bearings, and parts thereof, whether finished or unfinished, for whatever use intended, 10 cents per pound and 45 per centum ad valorem.

[blocks in formation]

PARAGRAPH 322.

ACT OF 1922.

PAR. 322. Railway fishplates or splice bars, and tie plates, made of iron or steel, one-fourth of 1 cent per pound; rail braces, and all other railway bars made of iron or steel, and railway bars made in part of steel, T rails, and punched iron or steel flat rails, one-tenth of 1 cent per pound.

ACT OF 1909.

PAR. 126. Railway bars, made of iron or steel, and railway bars made in part of steel, Trails and punched iron or steel flat rails, seven-fortieths of one cent per pound; railway fish-plates or splice-bars, made of iron or steel, three-tenths of one cent per pound.

PAR. 199. Articles or wares not specially provided for in this section, composed wholly or in part of iron, steel, lead, copper, nickel, pewter, zinc, gold, silver, platinum, aluminum, or other metal, and whether partly or wholly manufactured, forty-five per centum ad valorem.

ACT OF 1913.

PAR. 108. Railway fishplates or splice bars made of iron or steel, 10 per centum ad valorem.

PAR. 587. Railway bars, made of iron or steel, and railway bars made in part of steel, Trails, and punched iron or steel flat rails [Free].

PAR. 167. Articles or wares not specially provided for in this section * * * if composed wholly or in chief value of iron, steel, lead, copper, brass, nickel, pewter, zinc, aluminum, or other metal, but not plated with gold or silver, and whether partly or wholly manufactured, 20 per centum ad valorem.

PARAGRAPH 323.

ACT OF 1922.

PAR. 323. Axles and parts thereof, axle bars, axle blanks, and forgings for axles, of iron or steel, without reference to the stage or state of manufacture, not specially provided for, valued at not more than 6 cents per pound, sixtenths of 1 cent per pound: Provided, That when iron or steel axles are imported fitted in wheels, or parts of wheels, of iron or steel, they shall be dutiable at the same rate as the wheels in which they are fitted.

ACT OF 1909.

PAR. 142. Axles, or parts thereof, axle bars, axle blanks, or forgings for axles, whether of iron or steel, without reference to the stage or state of manufacture, not otherwise provided for in this section, valued at not more than six cents per pound, three-fourths of one cent per pound: Provided, That when iron or steel axles are imported fitted in wheels, or parts of wheels, of iron or steel, they shall be dutiable at the same rate as the wheels in which they are fitted.

ACT OF 1913.

PAR. 121. Axles, or parts thereof, axle bars, axle blanks, or forgings for axles, whether of iron or steel, without reference to the stage or state of manufacture, not otherwise provided for in this section, 10 per centum ad valorem: Provided, That when iron or steel axles are imported fitted in wheels, or parts of wheels, of iron or steel, they shall be dutiable at the same rate as the wheels in which they are fitted.

PARAGRAPH 324.

ACT OF 1922.

PAR. 324. Wheels for railway purposes, and parts thereof, of iron or steel, 'and steel-tired wheels for railway purposes, wholly or partly finished, and iron or steel locomotive, car, or other railway tires and parts thereof, wholly of partly manufactured, 1 cent per pound: Provided, That when wheels for rail way purposes, or parts thereof, of iron or steel, are imported with iron or steel axles fitted in them, the wheels and axles together shall be dutiable at the same rate as is provided for the wheels when imported separately.

« AnteriorContinuar »