Imágenes de páginas
PDF
EPUB

103. Freestone, granite, etc., except marble, breccia, and onyx, n. s. p. f., unmanufactured, or not dressed, hewn, or polished.

[blocks in formation]

103. Freestone, granite, etc., except marble, breccia, and onyx, n. s. p. f.; hewn, dressed, or polished or otherwise manufactured.

[blocks in formation]

105. Slates, slate chimney pieces, mantels, slabs for tables, roofing slates, and all other manufactures of slate, n. s. p. f.

[blocks in formation]

SCHEDULE C.-METALS AND MANUFACTURES OF.

Text of H. R. 10 and of the law of 1909.

H. R. 10.

106. Iron in pigs, iron kentledge, spiegeleisen, wrought and cast scrap iron and scrap steel, eight per centum ad valorem; but nothing shall be deemed scrap iron or scrap steel except second-hand or waste or refuse iron or steel fit only to be remanufactured; ferromanganese, chrome or chromium metal, ferrochrome or ferrochromium, ferromolybdenum, ferrophosphorus, ferrotitanium, ferrotungsten, ferrovanadium, molybdenum, titanium, tantalum, tungsten or wolfram metal, and ferrosilicon, fifteen per centum ad valorem.

107. All iron in slabs, blooms, loops, or other forms less finished than iron in bars, and more advanced than pig iron, except castings; muck bars, bar iron, square iron, rolled or hammered, round iron, in coils or rods, bars or shapes of rolled or hammered iron not specially provided for in this section, eight per centum ad valorem.

LAW OF 1909.

118. Iron in pigs, iron kentledge, spiegeleisen, and ferromanganese, two dollars and fifty cents per ton; wrought and cast scrap iron, and scrap steel, one dollar per ton; but nothing shall be deemed scrap iron or scrap steel except waste or refuse iron or steel fit only to be remanufactured by melting, and excluding pig iron in all forms.

184. Chrome or chromium metal, ferrochrome or ferrochromium, ferromolybdenum, ferrophosphorus, ferroti. tanium, ferrotungsten, ferrovanadium, molybdenum, titanium, tantalum, tungsten, or wolfram metal, valued at two hundred dollars per ton or less, twenty-five per centum ad valorem: valued at more than two hundred dollars per ton, twenty per centum ad valorem; ferrosilicon containing not more than fifteen per centum of silicon, five dollars per ton; ferrosilicon containing more than fifteen per centum of silicon, twenty per centum ad valorem.

119. Bar iron, muck bars, square iron, rolled or hammered, comprising flats not less than one inch wide nor less than three-eighths of one inch thick, round iron not less than sevensixteenths of one inch in diameter, three-tenths of one cent per pound.

120. Round iron, in coils or rods, less than seven-sixteenths of one inch in diameter, and bars or shapes of rolled or hammered iron, not specially provided for in this section, six-tenths of one cent per pound: Provided, That all iron in slabs, blooms, loops, or other forms less finished than iron in bars, and more advanced than pig iron, except castings, shall be subject to a duty of four-tenths of one cent per pound: Provided further, That all iron bars, blooms, billets, slabs, or loops, in the manufacture of which charcoal is used as fuel, shall be subject to a duty of eight dollars per ton.

108. Beams, girders, joists, angles, and nels, car-truck channels, TT, columns posts or parts or sections of columns and posts, deck and bulb beams, sashes, frames, and building forms, together with all other structural shapes of iron or steel, whether plain, punched, or fitted for use, or whether assembled or manufactured, twelve per centum ad valorem.

109. Boiler or other plate iron or steel, and strips of iron or steel, not specially provided for in this section; sheets of iron or steel, common or black, of whatever dimensions, whether plain, corrugated or crimped, including crucible plate steel and saw plates, cut or sheared to shape or otherwise, or unsheared, and skelp iron or steel, whether sheared or rolled in grooves, or otherwise, fifteen per centum ad valorem.

110. Iron or steel anchors or parts thereof; forgings of iron or steel, or of combined iron and steel, but not machined, tooled, or otherwise advanced in condition by any process or operation subsequent to the forging process, not specially provided for in this section, fifteen per centum ad valorem; antifriction balls, ball bearings, and roller bearings, of iron or steel or other metal, finished or unfinished, thirty-five per centum ad valorem.

111. Hoop, band, or scroll iron or steel not otherwise provided for in this section, twelve per centum ad valorem.

121. Beams, girders, joists, angles, channels, car-truck channels, T T, columns and posts or parts or sections of columns and posts, deck and bulb beams, and building forms, together with all other structural shapes of iron or steel, not assembled, or manufactured, or advanced beyond hammering. rolling, or casting, valued at ninetenths of one cent per pound or less, three-tenths of one cent per pound; valued above nine-tenths of one cent per pound, four-tenths of one cent per pound.

122. Boiler or other plate iron or steel, except crucible plate steel and saw plates hereinafter provided for in this section, not thinner than number ten wire gauge, cut or sheared to shape or otherwise, or unsheared, and skelp iron or steel sheared or rolled in grooves, valued at eight-tenths of one cent per pound or less, three-tenths of one cent per pound; valued above eight-tenths of one cent and not above one cent per pound, four-tenths of one cent per pound; valued above one cent and not above two cents per pound. five-tenths of one cent per pound; valued above two cents and not above three cents per pound, six-tenths of one cent per pound; valued at over three cents per pound, twenty per centum ad valorem: Provided, That all sheets or plates of iron or steel thinner than number ten wire gauge shall pay duty as iron or steel sheets.

123. Iron or steel anchors, or parts thereof, one cent per pound; forgings of iron or steel, or of combined iron and steel, but not machined, tooled, or otherwise advanced in condition by any process or operation subsequent to the forging process, not specially provided for in this section, thirty per centum ad valorem; antifriction balls, ball bearings, and roller bearings, of iron or steel or other metal, finished or unfinished, forty-five per centum ad valorem.

124. Hoop, band, or scroll iron or steel, not otherwise provided for in this section, valued at three cents per pound or less, eight inches or less in width, and less than three-eighths of one inch thick and not thinner than number ten wire gauge, three-tenths of one cent per pound; thinner than number ten wire gauge and not thinner than number twenty wire gauge, fourtenths of one cent per pound; thinner than number twenty wire gauge, sixtenths of one cent per pound: Provided, That barrel hoops of iron or steel, and hoop or band iron or hoop or band steel flared, splayed, or

112. Railway fishplates or splice bars made of iron or steel, ten per centum ad valorem.

113. All iron or steel sheets, plates, or strips, and all hoop, band, or scroll iron or steel, when galvanized or coated with zinc, spelter, or other metals, or any alloy of those metals; sheets or plates composed of iron, steel, copper, nickel, or other metals with layers of other metal or metals imposed thereon by forging, hammering, rolling, or welding; sheets of iron or steel, polished, planished, or glanced, by whatever name designated, including such as have been pickled or cleaned by acid, or by any other material or process, or which are cold rolled, smoothed only, not polished, and such as are cold hammered, blued, brightened, tempered, or polished by any process to such perfected surface finish or polish better than the grade of cold rolled,

punched, with or without buckles or fastenings, shall pay one-tenth of one cent per pound more duty than that imposed on the hoop or band iron or steel from which they are made; bands and strips of steel, exceeding twelve feet in length, not specially provided for in this section, thirty-five per centum ad valorem.

125. Hoop or band iron, or hoop or band steel, cut to lengths, or wholly or partly manufactured into hoops or ties, coated or not coated with paint or any other preparation, with or without buckles or fastenings, for baling cotton or any other commodity, threetenths of one cent per pound.

126. Railway bars, made of iron or steel, and railway bars made in part of steel, Trails and punched iron or steel flat rails, seven-fortieths of one cent per pound; railway fishplates or splice bars, made of iron or steel, three-tenths of one cent per pound.

127. Sheets of iron or steel, common or black, of whatever dimensions, and skelp iron or steel, valued at three cents per pound or less, thinner than number ten and not thinner than number twenty wire gauge, five-tenths of one cent per pound; thinner than number twenty wire gauge and not thinner than number twenty-five wire gauge, six-tenths of one cent per pound; thinner than number twenty-five wire gauge and not thinner than number thirty-two wire gauge, eight-tenths of one cent per pound; thinner than number thirty-two wire gauge, ninetenths of one cent per pound; corrugated or crimped, eight-tenths of one cent per pound; all the foregoing valued at more than three cents per pound, thirty per centum ad valorem: Provided, That all sheets or plates of common or black iron or steel not thinner than number ten wire gauge shall pay duty as plate iron or plate steel.

128. All iron or steel sheets or plates, and all hoop, band, or scroll iron or steel, excepting what are known commercially as tin plates, terneplates, and taggers tin, and hereinafter provided for, when galvanized or coated with zinc, spelter, or other metals, or any alloy of those metals, shall pay two-tenths of one cent per pound more duty than if the same was not so galvanized or coated; sheets or plates composed of iron, steel, copper, nickel, or other metal with layers of other metal or metals imposed thereon by forging, hammering, rolling, or welding, forty per centum ad valorem.

129. Sheets of iron or steel, polished, planished, or glanced, by whatever name designated, one and one-half

[blocks in formation]

114. Steel ingots, cogged ingots, blooms and slabs, die blocks or blanks, billets and bars, and tapered or beveled bars; mill shafting, pressed, sheared, or stamped shapes, not advanced in value or condition by any process or operation subsequent to the process of stamping; hammer molds or swaged steel; gun-barrel molds not in bars; all descriptions and shapes of dry sand, loam, or iron molded steel castings, sheets, and plates, if made by the Bessemer, Siemens-Martin, openhearth, or similar processes, not containing alloys, such as nickel, chromium, tungsten or wolfram, molybdenum, titanium, iridium, uranium, tantalum, boron, and similar alloys, and steel not specially provided for in this section, ten per centum ad valorem; steel ingots, cogged ingots, blooms and slabs, die blocks or blanks; billets and bars and tapered or beveled bars; pressed, sheared, or stamped shapes not advanced in value or condition by any process or operation subsequent to the process of stamping; hammer molds or swaged steel; gun-barrel molds not in bars; alloys used as substitutes for steel in the manufacture of tools; all descriptions and shapes of dry sand, loam, or iron molded castings, sheets, and plates; rolled wire rods in coils or bars not smaller than number six wire-gauge, and steel not specially provided for in this section, all the foregoing when made by the crucible, electric, or cementation process, either with or without alloys, and finished by rolling, hammering, or otherwise, fifteen per centum ad valorem.

cents per pound: Provided, That plates or sheets of iron or steel, by whatever name designated, other than the polished, planished, or glanced herein provided for, which have been pickled or cleaned by acid, or by any other material or process, or which are cold rolled, smoothed only, not polished, shall pay two-tenths of one cent per pound more duty than the corresponding gauges of common or black sheet iron or steel.

130. Sheets or plates of iron or steel, or taggers iron or steel, coated with tin or lead, or with a mixture of which these metals, or either of them, is a component part, by the dipping or any other process, and commercially known as tin plates, terneplates, and taggers tin, one and two-tenths cents per pound.

131. Steel ingots, cogged ingots, blooms, and slabs, by whatever process made; die blocks or blanks; billets and bars and tapered or beveled bars; mill shafting; pressed, sheared, or stamped shapes, not advanced in value or condition by any process or operation subsequent to the process of stamping; hammer molds or swaged steel; gun-barrel molds not in bars; alloys used as substitutes for steel in the manufacture of tools; all descriptions and shapes of dry sand, loam, or iron-molded steel castings; sheets and plates and stee! not specially provided for in this section, all of the above valued at three-fourths of one cent per pound or less, seven-fortieths of one cent per pound; valued above three-fourths of one cent and not above one and three-tenths cents per pound, three-tenths of one cent per pound; valued above one and three-tenth cents and not above one and eight-tenths cents per pound, five-tenths of one cent per pound; valued above one and eight-tenths cents and not above two and two-tenths cents per pound, sixtenths of one cent per pound; valued above two and two-tenths cents and not above three cents per pound, eight-tenths of one cent per pound; valued above three cents per pound and not above four cents per pound, one and one-tenth cents per pound; valued above four cents and not above seven cents per pound, one and twotenths cents per pound; valued above seven cents and not above ten cents per pound, one and nine-tenths cents per pound; valued above ten cents and not above thirteen cents per pound, two and three-tenths cents per pound; valued above thirteen cents and not above sixteen cents per pound, two and seven-tenths cents per pound; valued above sixteen cents and not above

« AnteriorContinuar »